NCP-MCI-6.10 EXAM QUESTIONS AND ANSWERS, NCP-MCI-6.10 EXAM DURATION

NCP-MCI-6.10 Exam Questions And Answers, NCP-MCI-6.10 Exam Duration

NCP-MCI-6.10 Exam Questions And Answers, NCP-MCI-6.10 Exam Duration

Blog Article

Tags: NCP-MCI-6.10 Exam Questions And Answers, NCP-MCI-6.10 Exam Duration, New NCP-MCI-6.10 Test Format, Study NCP-MCI-6.10 Material, NCP-MCI-6.10 Valid Test Fee

At any point in the process of buying our NCP-MCI-6.10 exam braindumps, the customer does not need to check the status of the purchase order, because as long as you have paid for it, then you can get it in a second. With all those efficiency, our NCP-MCI-6.10 study engine is suitable in this high-speed society. With strong strength in this career, we can claim that you can only study our NCP-MCI-6.10 learning guide for 20 to 30 hours, you can pass your NCP-MCI-6.10 exam with 100% guarantee.

Nutanix NCP-MCI-6.10 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Conduct Custom Monitoring within a Nutanix Multicloud Environment: This section of the exam measures the skills of Cloud Analysts and Systems Engineers and covers custom monitoring for optimized performance management. Candidates must analyze performance charts, set retention policies, create custom service level agreements (SLAs), and manage storage based on policies. Creating reports involves identifying the required type, selecting generation frequency, determining retention properties, and customizing report formats for different monitoring needs. Effective monitoring ensures better resource utilization, system efficiency, and proactive issue resolution within the multi-cloud environment.
Topic 2
  • Configure Disaster Recovery and Data Protection within a Nutanix Multicloud Environment: This section of the exam measures the skills of Disaster Recovery Specialists and Cloud Engineers and covers configuring protection policies and domains for data security and recovery. Candidates need to identify the right entities for protection, schedule backups, define retention policies, and set up replication to remote sites. Recovery plans must be configured and executed with proper scripting, network mapping, and failover strategies. Metro replication requires understanding failover methodologies, comparing solutions on different hypervisors, and preventing split-brain scenarios. Effective disaster recovery planning ensures minimal downtime and data integrity across environments.
Topic 3
  • Manage Clusters within a Nutanix Multicloud Environment: This section of the exam measures the skills of Infrastructure Engineers and Systems Administrators and covers the administration of Nutanix clusters. Storage management includes creating, reading, updating, and deleting storage containers and volume groups. Configuring AOS and Prism Central settings involves authentication, SSL certificate management, IAM role-based access control, and configuring network segmentation. Network administration procedures focus on creating VLAN-backed subnets, virtual switches, and load-balancing policies while monitoring NIC usage. Lifecycle management includes performing hardware and software updates and maintaining firmware. Hardware maintenance involves adding or removing nodes and physical disks while ensuring proper upgrades and replacements. Intelligent operations require configuring capacity policies, discovering application relationships, and simulating scenarios to optimize performance.
Topic 4
  • Troubleshoot a Nutanix Multicloud Environment: This section of the exam measures the skills of Technical Support Engineers and IT Operations Specialists and covers diagnosing and resolving common issues within a Nutanix multi-cloud environment. Troubleshooting protection policies and recovery plans requires identifying network mapping failures, vNIC issues, script execution problems, and connectivity failures. Metro replication troubleshooting involves addressing naming conventions, network limitations, and replication states. Security issues in AOS and Prism Central must be resolved by managing CVM communications, security warnings, and log analysis. LCM operations require diagnosing failures in inventory updates and version upgrades. Performance troubleshooting involves analyzing logs, reading performance charts, and adjusting VM configurations to meet performance needs.
Topic 5
  • Manage VMs within a Nutanix Multicloud Environment: This section of the exam measures the skills of Cloud Administrators and Virtualization Engineers and covers managing virtual machines (VMs) within a Nutanix multicloud environment. It includes creating and updating VMs by determining hardware requirements, boot modes, sizing, and configuration based on application needs. Candidates must understand how to deploy VMs using templates, snapshots, and image configurations, ensuring the correct formats for importing and exporting VMs. Migration processes require knowledge of prerequisites, storage, network settings, and software compatibility. Additionally, configuring VM categories and attributes is essential for proper organization and management within the environment, ensuring alignment with labels, storage policies, and security settings.

>> NCP-MCI-6.10 Exam Questions And Answers <<

NCP-MCI-6.10 Exam Duration - New NCP-MCI-6.10 Test Format

Besides this PDF format, Nutanix NCP-MCI-6.10 practice exams in desktop and web-based versions are available to aid you in recognizing both your weaker and stronger concepts. These real Nutanix NCP-MCI-6.10 Exam Simulator exams also points out your mistakes regarding the Nutanix NCP-MCI-6.10 exam preparation.

Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI v6.10) Sample Questions (Q41-Q46):

NEW QUESTION # 41
A security team asks an administrator toset up port mirroringof aspecific source VMto atarget VM.
What must the administrator ensure for this configuration to be possible?

  • A. Source VM and Target VM are on the same host.
  • B. Source VM and Target VM are on the same VPC.
  • C. Source VM and Target VM are on the same VLAN.
  • D. Source VM and Target VM are on the same subnet.

Answer: A

Explanation:
Port mirroring requires the source and target VMs to be on the same host to efficiently copy network traffic without additional routing overhead.
* Option B (Source VM and Target VM are on the same host) is correct:
* AHV's port mirroringonly works within a single hostbecause network packets are intercepted before leaving the hypervisor.
* If the VMs are on different hosts,mirroring cannot be configured without additional network tools.
* Option A (Same VLAN) is incorrect:
* VLAN membership isnot a requirementfor port mirroring.
* Option C (Same subnet) is incorrect:
* Port mirroring happens atthe virtual switch level, which does not require VMs to be in the same subnet.
* Option D (Same VPC) is incorrect:
* While VPCs provide network isolation,they do not control port mirroring availability.
References:
* Nutanix AHV Networking Guide #Configuring Port Mirroring in AHV
* Nutanix KB #Port Mirroring Best Practices


NEW QUESTION # 42
An administrator is trying to configure Metro Availability between Nutanix ESXi-based clusters. However, theCompatible Remote Sitesscreen does not list all required storage containers.
Which two reasons could be a cause for this issue? (Choose two.)

  • A. The destination storage container is not empty.
  • B. The remote site storage container has compression enabled.
  • C. Both storage containers must have the same name.
  • D. Source and destination hardware are from different vendors.

Answer: B,C


NEW QUESTION # 43
A new employee has inherited a partially configured Disaster Recovery (DR) schema. Source workloads have been identified and Nutanix Guest Tools has been installed.
There are two Protection Polices in place, one with an asynchronous schedule with a 1-hour RPO and a second policy utilizing synchronous replication. All of these workloads need to be recovered at a DR location and this will be orchestrated by Prism Central Recovery Plans.
What is the best way to setup this recovery orchestration?

  • A. Setup a single Recovery Plan utilizing stages of recovery delays as needed.
  • B. Identify the workload startup order and create Recovery Plans corresponding to the startup order.
  • C. Setup a Recovery Plan for the asynchronous replication and convert the synchronous replication to a Protection Domain.
  • D. Setup two Recovery Plans, one for the asynchronous replication and one for the synchronous replication.

Answer: B


NEW QUESTION # 44
Due toapplication requirements, an administrator needs to support amulticast configurationin anAHV cluster.
Which AHV feature can be used to optimize network traffic so that multicast traffic is only forwarded to the VMs that need to receive it?

  • A. LACP
  • B. IGMP Snooping
  • C. UDP
  • D. Network Segmentation

Answer: B


NEW QUESTION # 45
An administrator isprotecting an application and its datastored onVolume GroupsusingProtection Domains.
Duringfailover tests, allapplication VMs restore successfully, but theapplication data is completely missing.
How can the Protection Domain configuration be adjusted to avoid this issue in the future? (Choose two.)

  • A. Use application-consistent snapshots.
  • B. Place Volume Groups in a separate Protection Domain.
  • C. Select the "Auto protect related entities" checkbox.
  • D. Manually add Volume Groups to Protected Entities.

Answer: C,D

Explanation:
Protection Domains (PDs) in Nutanix ensure that entire applications and their associated data are protected during failover.However,Volume Groups (VGs) are not automatically includedunless explicitly configured.
* Option A (Select "Auto protect related entities") is correct:
* This setting ensures thatassociated Volume Groups, networks, and other dependencies are included in the Protection Domainautomatically.
* Without enabling this, only the VM itself would be protected, leading tomissing application data upon failover.
* Option B (Manually add Volume Groups to Protected Entities) is correct:
* If"Auto protect related entities" is not enabled, the administrator mustmanually add Volume Groups to the Protection Domain.
* This ensures that bothVMs and their attached Volume Groupsare replicated and recovered together.
* Option C (Place Volume Groups in a separate Protection Domain) is incorrect:
* Separating Volume Groups into a different PDdoes not guarantee they failover together with VMs.
* It is best practice tokeep related VMs and Volume Groups in the same PD.
* Option D (Use application-consistent snapshots) is incorrect:
* Whileapplication-consistent snapshots improve data integrity, theydo not fix missing Volume Groups in failover scenarios.
References:
Nutanix Disaster Recovery Guide#Protection Domain Configuration and Volume Groups Nutanix KB#Ensuring Volume Groups Are Included in Disaster Recovery Failovers


NEW QUESTION # 46
......

Our Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI v6.10) prep torrent will provide customers with three different versions, including the PDF version, the software version and the online version, each of them has its own advantages. Now I am going to introduce you the PDF version of NCP-MCI-6.10 test braindumps which are very convenient. It is well known to us that the PDF version is very convenient and practical. The PDF version of our NCP-MCI-6.10 Test Braindumps provide demo for customers; you will have the right to download the demo for free if you choose to use the PDF version. At the same time, if you use the PDF version, you can print our NCP-MCI-6.10 exam torrent by the PDF version; it will be very easy for you to take notes. I believe our NCP-MCI-6.10 test braindumps will bring you great convenience.

NCP-MCI-6.10 Exam Duration: https://www.surepassexams.com/NCP-MCI-6.10-exam-bootcamp.html

Report this page